A range of separator/filters for complete removal of liquid condensates, pipe scale, rust and dirt. Fitted with a 304 stainless steel element, the Eliminex uses inverse flow technology to eliminate condensed liquids and particles to 3 micron with negligible pressure drop.
For best results the Eliminex separator/filter should be installed downstream of an aftercooler or at least 8 metres from the compressor.
All Eliminex separators are fitted with an automatic drain valve.
Bowl: Metal
Pressure: 14 bar max
Temperature: +65 deg C
Pressure drop: <1 psi at 100 psi (at recommended flow rate)
Filtration: 3 micron
ISO8573.1: particulate class 3 (see engineers data section for a breakdown of ISO8573.1 numbers)
When selecting a separator choose a unit where the flow required is approximately 50% of the maximum in the table below.
Available on request: Larger Eliminex separators 3", 4" & 6" for up to 5500 cfm maximum flow.
